- Material:Corten steel
- overflow pipe: yes
- including pump: yes
- including fountain with LED lighting:Yes
- custom-made products: Custom-made products are possible
- Notes:
·Products should be unpacked immediately upon receipt to prevent moisture from accumulating between the packaging and the product. This can lead to uneven rust spots.
·The water elements should be placed on a solid, level surface.
·The pH value of the water should be neutral (7) so that the material is not attacked.
·Clean the product annually by spraying off coarse dirt with tap water.
·The products come without a layer of rust. The rusting process on Corten steel takes about 4-5 months, depending on the weather conditions.
·Rust can be removed by applying Owatrol. This is a penetrating rust inhibitor that forms a protective layer against rust. Owatrol protects and prevents the Corten steel from discolouring.
·During the rusting process, rust water can be released from the product.
·We advise against using Corten steel within 2 km of the coast.
·Always unplug the appliance when it is freezing.
·Lower the water level to below the overflow pipe. This is about 10 cm below the edge. Attention! The pump must be submerged.
·We recommend an ice-preventing device (available in any garden center or hardware store).
·The pump can remain in the water if the above conditions are met. Of course, you can also take the pump out of the water and leave it in a frost-free place over the winter.
- DANGER: Since the products cannot be unloaded via the rear tail lift of the truck, the customer must lift them over the side of the truck using a forklift truck upon delivery.
